Installation Guide

ASSEMBLY INSTRUCTION
slots on both Front Rail (5) and Back Rest (1).
Hook on and secure Seat Panel Support (7) to the two metal
Allen Key (A).
(2 and 3). Hook on Front Rail (5) hooks into loosen bolts, once placed tighten and secure all four bolt with
Hook on the Back Rest (1) into Left Arm (2) and Right Arm (3) securely.
back rest.
found on the bottom of sofa
**Leg and Hardware can be
LEG (4PCS)
30mm (B) (8pcs), Flat Washer M6 (C) (8pcs), using Allen Key (A). Make sure bolt are fully tightened and secure.
Attach Leg (4) (4pcs) to the Left Arm (L) (2) and Right Arm (R) (3). Legs are to be attached using JCBC Bolt M6 x
SUPPORT (1PC)
SEAT PANEL
Slightly lossen the four bolts using Allen Key (A) without removing the bolts completely from both Side Arms
1
5
7
STEP 4.
A
STEP 3.
1
2
3
4
4
2
B
C
8PCS
8PCS
C-Flat Washer M6
STEP 2.
7
B-JCBC Bolt M6 x 30mm
A
3
5
STEP 5.
Page : 3 OF 4