Instructions / Assembly

ManualsBrandsSeafuloy ManualsFurniture1 Open Shelf and 1 Drawer Silver Mirror Finish Nightstand 15.75 in. L x 16.54 in. W x 21.65 in. H

Table Of Contents

File E494673

Project 4788083042

January 28, 2018

REPORT

UNLISTED COMPONENT - ATTACHMENT PLUGS, FUSELESS

For Use Only In

APPLICANT’S CORD SETS AND POWER-SUPPLY CORDS

Zhongshan Henglan Boyi Electrical Appliance Factory

Zhongshan, Guangdong, 528400 China



2018 UL LLC

UL LLC authorizes the above named company to reproduce this Report only for

purposes as described in the Conclusion. The report should be reproduced in

its entirety; however if necessary to protect confidential product

information, the Construction Details Descriptive pages may be excluded.

Summary of content (4 pages)

PAGE 1
File E494673 Project 4788083042 January 28, 2018 REPORT on UNLISTED COMPONENT - ATTACHMENT PLUGS, FUSELESS For Use Only In APPLICANT’S CORD SETS AND POWER-SUPPLY CORDS Zhongshan Henglan Boyi Electrical Appliance Factory Zhongshan, Guangdong, 528400 China Copyright  2018 UL LLC UL LLC authorizes the above named company to reproduce this Report only for purposes as described in the Conclusion.
PAGE 2
File E494673 Vol. 2 Sec. 1 and Report Page 1 Issued: Revised: 2018-01-28 2018-05-08 DESCRIPTION PRODUCT COVERED: BY-33. USU, CNU - Unlisted Component – Attachment Plugs, Cat. Nos. BY-22 and ELECTRICAL RATING: Cat. No. BY-22 BY-33 Config.
PAGE 3
File E494673 Vol. 2 Sec. 1 and Report Page 2 Issued: 2018-01-28 CAT. NO. BY-22 - FIG. 1 General - The general design, shape and arrangement shall be as illustrated except where variations are specifically described. The Configuration is identical to NEMA 1-15P. See ILL. 1 to exposed blades dimensions. Body – Molded PVC, R/C (QMFZ2/8), Cat. No. 730, manufactured by SILVER AGE ENGINEERING PLASTICS (DONGGUAN) CO LTD (E225348), rated V-0, minimum thickness of 1.5 mm. See ILL. 2 for demensions details.
PAGE 4
File E494673 Vol. 2 Sec. 1 and Report Page 3 Issued: New: 2018-01-28 2018-05-08 CAT. NO. BY-33 - FIG. 2 General - The general design, shape and arrangement shall be as illustrated except where variations are specifically described. See ILL. 4 to exposed blades dimensions. 1. Body - R/C (QMFZ2/QMFZ8), PVC molded, Type 730, SILVER AGE ENGINEERING PLASTICS (DONGGUAN) CO LTD, (E225348), rated V-0, minimum thickness of 1.5 mm. See ILL. 5 for dimensional details. 2.