User Manual

8
Descriptions
1
Grab Line
2
Cargo net
3
Boston valve
4
Seat or seat cushion
5
Inflatable floor
6
Skeg
NOTE: Drawing for illustration purpose only. Actual product may vary not to scale.
Inflating Instructions
Before starting, locate a clean area free of stones or other sharp objects. Unroll the
kayak so it is laid out flat and locate your pump.
Use a hand or foot operated air pump to inflate the boat. Do not use high-pressure air
compressors. Adults should inflate the chambers following the numerical sequence
marked on the valves. It is very important to follow the numerical sequence; failure to
do so will result in an improperly inflated boat. Fill each chamber until it is stiff to the
touch but NOT hard. Use the enclosed ruler to check the main chamber for proper
inflation. DO NOT OVER INFLATE. Fill with cold air only.
Important: Air temperature and weather condition do affect the internal air pressure of
inflatable products. In cold weather the product will lose some pressure due to the fact
that the air will contract. If this occurs, you may want to add a little air to the product.
However, in hot weather, the air will expand. You must let some air out to prevent the
product from failing due to overpressure.