Operating instructions

20
Clean the bilge with hot water and de-
tergent or with bilge cleaner. Rinse
thoroughly. Lift front end of watercraft
to completely drain bilge. If any repairs
are needed to body or to the hull con-
tact your authorized SEA-DOO dealer.
For paint touch up to mechanical parts
use Bombardier spray paint.
Final Steps
Refer to this updated text.
Apply a good quality marine wax to the
body.
The seat should be partially left
opened and the rear access cover and
storage tray should be removed during
storage. This will avoid engine com-
partment condensation and possible
corrosion.
If the watercraft is to be stored out-
side, cover it with an opaque tarpaulin
to prevent sun rays and grime from af-
fecting the plastic components, water-
craft finish as well as preventing dust
accumulation.
CAUTION: The watercraft should
never be left in water for storage.
Never leave the watercraft stored in
direct sunlight.
smo2003-004b.fm Page 20 Wednesday, January 22, 2003 11:41 AM