Operating instructions

17
CAUTION: Antifreeze mix must be
fed in cooling system. Otherwise re-
maining water will freeze. This opera-
tion requires a good technical knowl-
edge of the cooling system path. If
antifreezing is not performed ade-
quately engine/exhaust system may
freeze and cause severe engine dam-
age. We strongly recommend this op-
eration be performed by an autho-
rized SEA-DOO dealer.
CAUTION: Always use ethylene gly-
col antifreeze containing corrosion
inhibitors specifically recommended
for aluminum engines.
NOTE: When available, it is recom-
mended to use biodegradable anti-
freeze compatible with internal com-
bustion aluminum engines. This will
contribute to protect the environment.
NOTE: The engine will not have to run
during this operation but should have
been ran before, to exhaust as much
water as possible, from cooling sys-
tem components.
Hose Pinchers Installation
Some hoses have to be plugged to
prevent draining, before filling cooling
system jackets with the antifreeze.
Install hose pinchers at the following
location:
1. Water inlet hose
2. Engine cylinder drain hose (coming from
underneath engine)
1. Water outlet hose underneath tuned pipe
F08E0GY
2
1
F08E0PY
1
smo2003-004b.fm Page 17 Wednesday, January 22, 2003 11:41 AM