Operating instructions

12
SPECIAL PROCEDURES
Towi ng the Watercraft in
Water
It is the same as explained in the 2003
Operator’s Guide. The hose location
and routing differs. Refer to the follow-
ing updated text and illustration.
Remove rear access cover.
Install pincher as shown.
1. Hose pincher on water supply hose
Properly relatch cover.
CAUTION: When finished towing the
watercraft, hose pincher should be
removed before operating it. Failure
to do so will result in damage to the
engine.
F08E08Y
1
smo2003-004b.fm Page 12 Wednesday, January 22, 2003 11:41 AM