Specifications

32
©2013 Hot Products. All rights reserved.
INTAKE
SYSTEMS
SEA-DOO
4 STROKE
ENGINE/
GASKETS
EXHAUSTDRIVE LINE
HANDLING
ELECTRICALWATERLINE
/BILGE
STEERING
& CONTROLS
BODY
ACC
E
SSO
RIE
S
ACCESSORIES
SERVICE TOOLS
/HARDWARE
CHEMICAL
SEA-DOO 4-STROKE • PUMP
R&D ANTI-CAVITATION
CONE FOR SEA-DOO
The unique patent pending design balances the
bowl pressure in the last stage of the pump to
eliminate detectable cavitation. Improve bottom
end punch midrange pull and overall performance.
Description Part No.
RXP 185/215, RXT 215, RXP-X 255, 163-95001
RXT-X 255, GTX
WET WOLF PUMP CONE
The Adjust-A-Thrust has been shown to gain .5 to 1.5 more top end.
Makes a noticeable difference in the low end and midrange as well.
Description Part No.
Wet Wolf Pump Cone fits all SEA4
2001-06 RXP, RXT, GTX and 4-Tec N/A and SC
*Note - This unit performs well on stock craft, and crafts with handling mods,
or limited engine mods - We do not recommend this unit for modified craft.
SEA-DOO OEM TYPE SPECIALTY TOOLS
For the repair and installation of Sea-Doo 4-Tec drive shaft and the pump shaft.
R&D BILLET ADJUSTABLE
ANTI-CAVITATION CONE KIT
The R&D RXP 260X Billet Adjustable Pump Cone Kit is a creative new bolt
on part that adds 1 full inch of additional length over the OEM cone, and also
allows an additional .400” of adjustable tuning range. The extended length
allows custom rpm tuning, reduced cavitation and adds additional pump
thrust. Precision tuning the pump cones length with the kit included cone
spacers will add to top speed while keeping the engine rpm’s stable and out
of the rev limiter. Precision CNC machined from 6061 aluminum and o-ring
sealed for leak free pump bearing protection. The R&D Billet Cone kit can be
ordered in 3 specific cone sets that will allow an adjustment range based on
horsepower output, rpm range, and prop pitch. O-ring sealed and anodized
to prevent corrosion and allow years of trouble free adjustability. Call R&D for
cone kit suggestions or performance recommendations for a base kit that will
offer a tuning range for your application. There are many possible tuning
combinations never before possible without this unique concept. For example,
RPM’s too high, add shims to reduce RPM’s. At any time if needed,
additional longer cones can be ordered to allow a wider range of tuning.
Description Part No.
R&D Adjustable Cone Kit with Tuning 163-95012
Range for 81-83mm Nozzle (Short Cone Kit)
R&D Adjustable Cone Kit with Tuning 163-95013
Range for 83-84mm Nozzle (Medium Cone Kit)
R&D Adjustable Cone Kit with Tuning 163-95014
Range for 84-85mm Nozzle (Long Cone Kit)
R&D Short Cone Parts Kit 163-95012C
(Cone and Bolts Kit for Additional Tuning)
R&D Medium Cone Parts Kit 163-95013C
(Cone and Bolts Kit for Additional Tuning)
R&D Long Cone Parts Kit 163-95014C
(Cone and Bolts Kit for Additional Tuning)
RAD 4 RACING SEA-DOO RXP
THRU HULL FITTING
Replace the stock carbon seal with this RAD 4 Racing
reliable bearing carrier. Includes drive shaft skim for
perfect installation. For All RXP and RXP-X.
Description Part No.
Rad 4 Racing RXP/RXP-X Thru Hull Fitting R4RTHUHULL