Specifications

20
©2013 Hot Products. All rights reserved.
INTAKE
SYSTEMS
SEA-DOO
4 STROKE
ENGINE/
GASKETS
EXHAUSTDRIVE LINE
HANDLING
ELECTRICALWATERLINE
/BILGE
STEERING
& CONTROLS
BODY
ACC
E
SSO
RIE
S
ACCESSORIES
SERVICE TOOLS
/HARDWARE
CHEMICAL
SEA-DOO 4-STROKE • ENGINE • FUEL SYSTEM
‘08 AND NEWER
RIVA RISING RATE FUEL
PRESSURE REGULATOR KIT
RIVA’s Fuel Pressure Regulator Kits provide the precision pressure control
necessary to compliment a variety of performance applications. Kits are fully
assembled & mount securely via sturdy stainless steel bracket. High quality
billet pressure regulator can adjust base pressure from 25 to 80 PSI. Unit can
also be set up as rising rate fuel pressure regulator at a 1 to 1 ratio providing
one additional pound of fuel pressure for every pound of boost gain. Plugs
directly into original fuel system with OEM connectors and features a large
3/8" fuel return line. Includes integrated liquid-filled pressure gauge and billet
Fuel Pressure Regulator Block-off necessary for removal of stock fuel
pressure regulator.
Key Features Include:
• Precision fuel pressure control with optional rising rate function.
• High quality stainless steel liquid-filled pressure gauge.
• Large 3/8 fuel return line.
• Billet Fuel Pressure Regulator Block-off.
• Easy bolt-on installation with OEM fuel connectors.
• Complete installation instructions & tuning guide.
Description Part No.
RIVA Fuel Regulator Kit - 07 & Older 215 RS12050RRFPR07
RIVA Fuel Regulator Kit RS12050RRFPR08
08 & Newer 215/255/260 (except i-Control)
‘07 AND OLDER
R&D RRFPR FUEL
PRESSURE REGULATOR
R&D offers a custom high performance fuel
pressure regulator system designed to “bolt on”
to the RXP-X/RXT-X 260. The R&D Regulator Kit
comes completely assembled with all fuel lines,
connectors, and fittings in place and ready to
install. The R&D Kit also includes the necessary “Port Plug” to easily block
off the stock in tank pressure regulator, and custom “plug on” return line
fitting. The R&D regulator bracket will allow the regulator to be installed under
the top deck cleanly and out of the way, yet allow fuel pressure tuning access
easily accessible. Base fuel pressure is adjustable from 50 to 75 PSI with
high pressure spring (installed), and can also be set up as a Rising Rate
System (60-75). The R&D system is very easy to install, and all hardware can
be removed and easily put back to stock at any time. Fuel rail and tank return
line fittings are O.E.M. push on “snap lock” fitting connectors which will make
the R&D Regulator System easy and hassle free to install.
Description Part No.
R&D RRFPR Fuel Pressure Regulator 803-81000
RXP-X 260 (2012-13)
R&D RRFPR Fuel Pressure Regulator 803-81001
RXT-X 260/Universal for other 2008+ Sea-Doo Models
R&D INLINE FUEL
PRESSURE GAUGE
ADAPTOR
The R&D Fuel Pressure Gauge
Adaptor Tool is designed to be a plug in fuel pressure gauge that needs no
modifications to install and use. The adaptor installs inline between the
O.E.M. fuel rail and the R&D RRFPR via the OEM connectors for easy
connect and disconnect. Simply disconnect the O.E.M. locking fuel connector
from the fuel rail and plug the gauge tool directly into the connector. Plug the
locking connector supplied on the R&D tool onto the fuel rail and lock. Use
the tool to verify fuel pressure and fuel pump condition. Use the tool to set
and verify base fuel pressure settings on the R&D Rising Rate Fuel Pressure
Regulator (RRFPR). When finished, disconnect the tool and reconnect the
stock fuel line. The R&D Tool works on all Sea-Doo fuel systems. Installation
time is only 2 minutes. Liquid filled fuel pressure gauge sold separately.
Description Part No.
R&D Inline Fuel Pressure Guage Adaptor 613-00190
R&D Liquid Filled Fuel Pressure Gauge 900-02180
INNOVATE LC-1 WIDEBAND
AIR/FUEL RATIO KIT
Description Part No.
Innovate LC-1 Wideband Air/Fuel Ratio Kit 900-04378
Photo Shows
613-00190 &
900-02180