Operating instructions

48
Coolant Level
Remove seat extension to expose
cooling system expansion tank.
1. Expansion tank
With vehicle on a level surface, liquid
should be between MIN. and MAX.
level marks of coolant reservoir when
engine is cold.
1. Level between marks when engine is cold
NOTE: The watercraft is level when it
is in water. When on a trailer, raise trail-
er tongue and block in this position
when bumper rail is level.
Add coolant to have the level between
marks as required. Use a funnel to
avoid spillage. Do not overfill.
Properly reinstall and tighten filler cap
then reinstall seat extension.
NOTE: A cooling system that frequent-
ly requires coolant is the indication of
leaks or engine problems. See an au-
thorized Bombardier SEA-DOO dealer.
Coolant Replacement
Refer to MAINTENANCE section.

WARNING
Check coolant level with engine
cold. Never add coolant in cool-
ing system when engine is hot.
1
F18E0MZ
F18E0NY
1
smo2003-003a.book Page 48 Tuesday, August 27, 2002 9:23 AM