Operating instructions

ManualsBrandsSeaDoo ManualsMarineGTX 4-Tec Series

34

English/Metric System

Allows to display the units in the metric

system or in the SAE English system.

NOTE: This function is not available

when information center displays the

compass, hourmeter or trip hour meter.

1. Press TOGETHER and hold for 2 seconds

Trip Hour Meter

While in the trip hour meter mode:

1. Press to start or stop trip hour meter

1. Press and hold for 2 seconds to reset

Trip hour meter is reset every time en-

gine is turned off.

Message Display

The information center features a dis-

play area that blinks a message when-

ever one of the following circumstances

occurs. The abbreviations between pa-

renthesis here are the code displayed:

• engine or exhaust system overheat-

ing (H-TEMP)

• low oil pressure (OIL)

• low battery voltage (12V LOW)

• high battery voltage (12V HI)

• low fuel level (FUEL-LO)

• maintenance reminder (MAINT)

• check engine (CHK ENG)

• sensor failure (vehicle electronic equip-

ment) (SENSOR)

• invalid safety lanyard (KEY)

• safety lanyard, learning key active

(L KEY)

• end of faults (END).

A beeper will sound depending on the

fault occurring to catch the driver at-

tention when necessary.

Except for low liquid levels, which can be

corrected by refilling, it is recommend-

ed to see an authorized Sea-Doo dealer

when other messages occur.

1

F18L090

1

F18L092

1

F18L092

smo2003-003a.book Page 34 Tuesday, August 27, 2002 9:23 AM