Operating instructions

31
The speed sensor mounted on the
transom sends the signal to the MPEM
and the MPEM send it to the gauge.
7) Tachometer
An analog tachometer indicates the
revolutions per minute (RPM) of the
engine. Multiply by 1000 to obtain the
actual revolutions.
In addition, a digital tachometer can be
displayed in the information center.
See INFORMATION CENTER GAUGE/
BUTTONS below.
8) Information Center
Gauge/Buttons
This is a multifunction gauge that sup-
plies several real time useful informa-
tion to the driver.
Components Description
1. Analog speedometer
2. Analog tachometer
3. Display area
1. Text and numerical area
1. Function buttons
Display Area
The display area comprises the follow-
ing.
1. Fuel level indicator
2. Numerical section
3. Units and messages section
Fuel Level Display
Bar gauge continuously indicates the
amount of fuel in the fuel tank while
riding. A low-fuel condition is also indi-
cated when in the information center
when only one bar is displayed. See
MESSAGE DISPLAY below.
Numerical Section
This section shows the digits of the
function displayed such as the speed-
ometer, trip hour meter etc.
F18H08Y
3
1 2
F18H08Z
1
1
F18L090
F18H080
3 21
smo2003-003a.book Page 31 Tuesday, August 27, 2002 9:23 AM