Specifications

82
NOTE: Some items are included in the PRE-OPERATION CHECKS and not nec-
essarily repeated in this chart.
D: Dealer
C: Customer
➀ Every 10 hours in salt water use.
➁ These items have to be initially checked after 25 hours. Thereafter, servicing
to be made as specified in this chart.
➂ Daily flushing in salt water or foul water use.
➃ Except DI models.
➄ Emission-related component.
➅ In salt water use.
➆ Replace at 150 hours.
➇ Replace at 250 hours.
➈ Check at 350 hours or 5 years.
O.P.A.S. SYSTEM
O.P.A.S. system IID
PROPULSION SYSTEM
Drive shaft boot and splines (if so equipped) I ➁ D
Drive shaft protection hose I ➁ D
PTO flywheel LL C
Seal carrier (XP DI models) LL C
Shifter system/cable IID
VTS (Variable Trim System) (if so equipped) IID
Jet pump reservoir oil and oil level RI R D
Jet pump cover pusher (if so equipped) I D
Impeller shaft seal ➆ D
Impeller and impeller/wear ring clearance R ➁ D
Water intake grate I ➁ C
HULL AND BODY
Bailer pick-ups, check for obstructions IIC
Hull IIC
DESCRIPTION FREQUENCY
I: Inspect, verify, clean, adjust, lubricate,
replace if necessary
C: Clean
L: Lubricate
R: Replace
FIRST 10 HOURS EVERY 25 HOURS OR 3 MONTHS EVERY 50 HOURS OR 6 MONTHS EVERY 100 HOURS OR 1 YEAR TO BE PERFORMED BY
smo2004-002a.book Page 82 Thursday, August 21, 2003 2:54 PM
www.SeaDooManuals.net