Specifications

74
This will prevent the cooling system
from filling which may lead to water be-
ing injected into and filling the exhaust
system. Without the engine running
there isn’t any exhaust pressure to car-
ry the water out the exhaust outlet.
CAUTION: Failure to do this may re-
sult in damage to the engine. If you
must tow a stranded watercraft in
water and do not have a hose pinch-
er, be sure to stay well below the
maximum towing speed of 24 km/h
(15 MPH).
Snugly install the hose pincher on the
water supply hose as shown.
NOTE: A red tape on the water supply
hose indicates which hose to pinch.
GTI AND GTI LE MODELS
1. Hose pincher
GTI RFI AND GTI LE RFI MODELS
1. Follow this hose towards rear
2. Hose coming from engine
3. Install hose pincher here on this side of the
T-fitting
F01B23Y
F02E04Y
1
F17E0CY
1
2
3
smo2004-002a.book Page 74 Thursday, August 21, 2003 2:54 PM
www.SeaDooManuals.net