Specifications

44
All Models except XP DI
To remove the seat, pull the latch lever
upward and hold. Lift and pull the seat
rearward.
NOTE: It is necessary to remove the
seat extension first.
When reinstalling the seat, place seat
cavity over body hook.
1. Seat cavity
1. Body hook
To latch seat, align latch hole with pin
then, firmly push downward on rear of
the seat.
1. Latch hole
2. Pin
Engine Compartment
All Models except XP DI
Removing the seat gives access to the
engine, mechanical, electrical and fuel/
oil systems.
All Models
21) Seat Extension Latch
(if so equipped)
Removing the seat extension allows
access to the rear storage basket. It
also gives access to the seat latch on
models with a seat extension.
1
F17L0NY
1
F17L0MY

WARNING
Components inside engine com-
partment may be hot. When start-
ing or operating the engine, do not
touch any electrical part. Never
leave any object, rag, tool, etc., in the
engine compartment or in the bilge.
F00L2TY
12
smo2004-002a.book Page 44 Thursday, August 21, 2003 2:54 PM
www.SeaDooManuals.net