Specifications

37
From the forward position, pull the le-
ver to reverse. Push back to go to for-
ward. Always set in forward when fin-
ished. To find the neutral, set in reverse
then push back until the watercraft
stops moving backwards.
FORWARD POSITION
NEUTRAL POSITION
REVERSE POSITION
8) Fuel Gauge/Low Oil
Warning Light
(if so equipped)
Analog gauge indicates the amount of
fuel in the fuel tank and a warning light
turns on when level is low in oil reser-
voir.
1. Low oil warning light
9) Speedometer
(if so equipped)
Analog speedometer indicates the
speed of watercraft in miles per hour
(MPH) and kilometers per hour (km/h).
The speed sensor mounted on the ride
plate sends the signal to the speedom-
eter and information center (if so
equipped).
10) Information Center
Gauge/Buttons
(if so equipped)
This is a LCD multifunction gauge. Dif-
ferent displays and functions can be
activated using 2 buttons — MODE
and SET — following specific sequenc-
es as described below.
1. To change display mode
2. To set or reset a function
F17L0AY
F17L0BY
F17L0CY
10
F01G07Y
1
F00L2BY
12
smo2004-002b_3_Vehicle.fm Page 37 Wednesday, August 27, 2003 2:52 PM
www.SeaDooManuals.net