Specifications

106
Engine Lacks Acceleration or Power
Watercraft Engine Cannot Run Above Idle Speed
Watercraft Can Not Reach Top Speed
Abnormal Noise From Propulsion System
OTHER OBSERVATION POSSIBLE CAUSE REMEDY
Weak spark.
Refer to engine MISFIRES, RUNS
IRREGULARLY.
Incorrect fuel mixture
(carburetor-equipped models).
Refer to engine MISFIRES, RUNS
IRREGULARLY.
Water in fuel or injection oil.
Siphon and replace.
Overheated engine. See engine OVERHEATS.
Clogged injectors
(RFI and DI models).
Refer to an authorized SEA-DOO
dealer.
Low fuel pressure
(RFI and DI models).
Refer to an authorized SEA-DOO
dealer.
Stuck RAVE valves
(if so equipped).
Refer to an authorized SEA-DOO
dealer.
OTHER OBSERVATION POSSIBLE CAUSE REMEDY
The monitoring system put the
watercraft in limp home mode
due to a component malfunc-
tion (DI models).
Try removing and reinstalling the
safety lanyard on its post. Refer
to an authorized SEA-DOO dealer.
OTHER OBSERVATION POSSIBLE CAUSE REMEDY
Cavitation.
Jet pump water intake clogged.
Clean.
Damaged impeller.
Replace. Refer to an authorized
SEA-DOO dealer.
The safety lanyard used purpose-
ly does not allow watercraft top
speed (DI models).
Use a safety lanyard that allows to
reach the top speed.
The monitoring system put the
watercraft in limp home mode
due to a component malfunc-
tion (DI models).
Release throttle so that engine
returns to idle speed. Refer to an
authorized SEA-DOO dealer.
OTHER OBSERVATION POSSIBLE CAUSE REMEDY
Cavitation.
Weeds or debris jammed around
impeller.
Clean and check for damage.
Damaged impeller shaft or drive
shaft.
Refer to an authorized SEA-DOO
dealer.
smo2004-002a.book Page 106 Thursday, August 21, 2003 2:54 PM
www.SeaDooManuals.net