Technical data

Section 04 ELECTRICAL SYSTEM
Subsection 02 (STARTER)
04-02-2
Remove thrust washer from armature shaft.
1. Thrust washer
Remove the other end cover and gasket.
Remove the 3 washers from armature shaft.
1. Washers
Remove armature.
1. Pull armature shaft
Release brush wires of yoke from brush holder.
Remove brush holder.
1. Remove brush holder
To remove brushes from yoke, loosen nut and re-
move washers.
1. Loosen nut and remove washers
Remove brushes.
F06H1HA
1
F06H1IA
1
F06H1JA
1
F06H1KA
1
F06H1LA
1
www.SeaDooManuals.net