Specifications

Watercraft Can Not Reach Top Speed
OTHER
OBSERVATION
POSSIBLE CAUSE REMEDY
The Sea-Doo learning key
TM
is used which purposely does
not allow watercraft to reach
its top speed.
Use a regular DESS key.
The monitoring system put
the watercraft in limp home
mode due to a component
malfunction.
Refer to MONITORING
SYSTEM in SPECIAL
PROCEDURES.
Engine and/or EMS.
Faulty supercharger and/or
intercooler (if so equipped)
Refer to an authorized Sea-Doo
dealer.
Models with sliding
vanes: O.P.A.S.
TM
side vanes do not go
up while watercraft is
at speed.
Clogged filter, square rings
damaged, leakage in hoses or
mechanical malfunction.
Refer to an authorized Sea-Doo
dealer.
Models with sliding
vanes: O.P.A.S. side
vanes do not go
down while engine is
at idle.
Broken spring inside side vane
cylinder.
Refer to an authorized Sea-Doo
dealer.
Engine RPM Gradually Decreases and Engine Stops
OTHER
OBSERVATION
POSSIBLE CAUSE REMEDY
Outoffuel.
Refill.
CPS sensor malfunction. Refer to an authorized Sea-Doo
dealer.
TOPS malfunction. Refer to an authorized Sea-Doo
dealer.
_____________________
93