Specifications

26) Bilge Drain Plugs
Drain plugs have two functions:
– Should water be found in the bilge,
it can be easily drained by unscrew-
ing the drain plugs when engine is
off and watercraft is out of water
– Drain plugs use a low pressure area
inthejetpumptosiphonthewa-
ter out of the bilge when the engine
is operating. Inspect each pick-up
screen for obstructions, clean as
necessary.
CAUTION: Remove watercraft from
water prior to unscrewing drain
plugs.
F18L14Y
1 1
2 3
TYPICAL
1. Drain plugs
2. Tighten
3. Unscrew
Tilt the watercraft slightly to the rear
so that the water can completely flow
out of the bilge.
Itissuggestedtodrainbilgeona
ramp.
CAUTION: Make sure drain plugs
areproperlysecuredpriorto
launching the watercraft in water.
27) Jet Pump Nozzle
Jet pump nozzle turns side to side via
rider input at the handlebar. This pro-
vides directional control when engine
is running.
F18J05Z
1
TYPICAL
1. Jet pump nozzle
28) Reverse Gate
When selecting the neutral or reverse
position with the shift lever, the re-
verse gate moves up or down to ob-
tain the desired position.
F18J05Y
1
TYPICAL
1. Reverse gate
54
______________________