Specifications

Preseason Preparation Chart
NOTE: It is highly recommended that an authorized Sea-Doo dealer perform
the annual safety inspection and factory campaigns in addition to the preseason
preparation all at the same time.
OPERATIONS
TO BE
PERFORMED
BY
GENERAL Lubrication/corrosion protection
Operator
Exhaust system condition and fasteners Dealer
Condition of seals and fasteners
Dealer
ENGINE
Oil level Dealer
COOLING
SYSTEM
Inspection of cooling system coolant level, hoses
and components if antifreeze was not changed for
storage, drain and replace with new antifreeze.
Dealer
Fuel injection sensors verification Dealer
Fuel system; check valves, lines, fasteners,
pressurization
Dealer
Filler neck, fuel tank and fuel cap condition Dealer
Fuel tank straps Operator
FUEL SYSTEM
Refill fuel tank
Operator
Battery condition/charging and reinstallation. Set
the preferences in information center
Dealer
Battery, starter connections and routing Dealer
Monitoring beeper Dealer
ELECTRICAL
SYSTEM
Digitally encoded security system Dealer
STEERING
SYSTEM
Steering system adjustment/inspection
Dealer
O.P.A.S.
SYSTEM
Check O.P.A.S. system condition
Dealer
Shifter system condition and cable adjustment Dealer
VTS (Variable Trim System, if so equipped)
Dealer
PROPULSION
SYSTEM
Propulsion system inspection Dealer
Inspection of drain plugs Dealer
HULL AND
BODY
Ski/wakeboard post and fasteners Operator
118
_____________________