Specifications

General Inspection and
Cleaning
Inspection
Check engine compartment for any
damage and for leaks of fuel, coolant
or oil. Ensure all hose clamps are
properly secured and no hose is
cracked, kinked or presenting any
other damage.

WARNING
If any gasoline leak and/or odor are
present, do not start the engine.
Have the watercraft serviced by an
authorized Sea-Doo dealer.
Inspect muffler, battery, fuel tank and
oil reservoir fastening devices. Visual-
ly check electrical connections for cor-
rosion and tightness.
Inspect hull and jet pump water intake
grate for damage. Replace or have
damaged parts repaired.

WARNING
Periodically verify seat(s) lock pin
and tighten if needed. Make sure
seat(s) securely latches.
Cleaning
The bilge should be cleaned by an
authorized Sea-Doo dealer to remove
any fuel/oil/electrolyte deposits and
mildew.
Occasionally, wash the body with wa-
ter and soap (only use mild detergent).
Remove any marine organisms from
engine and/or hull. Apply non-abra-
sive wax such as silicone wax.
CAUTION: Never clean fiberglass
and plastic parts with strong de-
tergent, degreasing agent, paint
thinner, acetone, etc.
Stains may be removed from seat and
fiberglass with Knight's Spray-Nine
from Korkay System Ltd or the equiv-
alent.
To clean the carpets, use 3M™ Citrus
Base Cleaner (24 oz spay can) or the
equivalent.
Respect the environment by ensuring
fuel, oil or cleaning solutions do not
drain into the waterways.
_____________________
111