Specifications

Fuses
Fuse Removal/Inspection
If an electrical problem occurs, check
the fuses. If a fuse is burnt, replace
by one of the same rating.
A15E0KZ
1
2
3
1. Fuse
2. Check if melted
3. Ampere rating

WARNING
Do not use a higher rated fuse as
this can cause severe damage. If
a fuse has burnt out, source of
malfunction should be determined
and corrected before restarting.
See an authorized Sea-Doo dealer
for servicing.
Description/Location
FUSE DESCRIPTION LOCATION
3 A Information center gauge
3 A Beeper
3 A Depth sounder (if so equipped)
3 A Fuel level
7.5 A
VTS (if so equipped)
10 A Fuel pump
10 A
Cylinder 1 (ignition coil and injection)
10 A Cylinder 2 (ignition coil and injection)
10 A
Cylinder 3 (ignition coil and injection)
3 A TOPS sensor
15 A Diagnostic connector
500 Fuel level
10 A Electric starter
3 A CAPS
Fuse box (engine compartment)
30 A
30 A
Main
Harness connected to starter relay
(engine compartment)
_____________________
109