Specifications

PERIODIC MAINTENANCE CHART
FIRST 10 HOURS
25 HOURS OR 3 MONTHS
50 HOURS OR 6 MONTHS
100 HOURS OR 1 YEAR
200 HOURS OR 2 YEAR
A: ADJUST
C: CLEAN
I: INSPECT
L: LUBRICATE
R: REPLACE
TO BE PERFORMED BY
PART/TASK LEGEND
ELECTRICAL SYSTEM
Spark plug
(5)
IIRDealer
Electrical connections and fastening (ignition
system, starting system, fuel injectors etc.)
IIDealer
ECM connector (visual inspection without
disconnecting)
I
(4)
Dealer
Digitally Encoded Security System (DESS) and
DESS key/post
IIDealer
Monitoring beeper I I Dealer
Battery and fasteners I I Dealer
(5) Emission-related component.
(4) In salt water use.
STEERING SYSTEM
Steering cable and connections I I Dealer
Steering nozzle bushings I I Dealer
—
Off-power assisted steering (O.P.A.S.) I I Dealer
Off-power assisted steering filter (if
applicable)
I
(6)
Operator
(6) Every 25 hours when riding in
weed areas.
PROPULSION SYSTEM
Drive shaft corrosion protection
(4)
L
(7)
Dealer
Carbon ring and rubber boot (drive shaft) I I Dealer
Impeller boot I I Dealer
Impeller shaft seal, sleeve and O-ring I
(7)
Dealer
Drive shaft/impeller splines I, L Dealer
Sacrificial anode (if so equipped)
(2)
Dealer
Reverse system/cable and connections I I Dealer
VTS (Variable Trim System),
(if so equipped)
IIDealer
Impeller and impeller wear ring clearance I I Dealer
Ride plate and water intake grate I I Operator
(2) Inspect each month (more
often in salt water use) and
change when necessary.
(7) Perform at storage
period or after
100 hours of use whichever
comes first.
(4) In salt water use.
104
_____________________