Specifications

PERIODIC MAINTENANCE CHART
FIRST 10 HOURS
25 HOURS OR 3 MONTHS
50 HOURS OR 6 MONTHS
100 HOURS OR 1 YEAR
200 HOURS OR 2 YEAR
A: ADJUST
C: CLEAN
I: INSPECT
L: LUBRICATE
R: REPLACE
TO BE PERFORMED BY
PART/TASK LEGEND
GENERAL
Lubrication/corrosion protection L Operator
—
ENGINE
Engine oil and filter (including cover's O-rings) R R
(7)
Dealer
Support and rubber mount I I Dealer
Exhaust system fasteners
(5)
IIDealer
Supercharger clutch R
(8)
Dealer
(5) Emission-related component.
(7) Perform at storage period
or after 100 hours of use
whichever comes first.
(8) Replace every 100 hours OR
50 hours for severe
condition (high engine RPM
and rough water riding).
COOLING SYSTEM
Flushing (exhaust system)
(3)
(7)
Operator
Hose and fasteners I Dealer
Coolant I R Dealer
(3) Daily flushing in salt water
or foul water use.
(7) Perform at storage period
or after 100 hours of use
whichever comes first.
FUEL SYSTEM
Throttle cable I I
(7)
Dealer
Fuel injection system sensors I I Dealer
EMS Fault code reading
(5)
IIDealer
Fuel lines, connections, pressure r
elief valve
and fuel system leak test
(5)
IIDealer
Throttle body (IMPORTANT: see
(1)
IL
Dealer/
Operator
Throttle position sensor (TPS
)
(5)
IIDealer
Air intake silencer fit/tig
htness
IIDealer
Fuel tank straps I I Dealer
(1) IMPORTANT: When use in
salt water, the throttle body
lubrication is highly
recommended after every
10 hours of use. Failure to
perform lubricationwill result
in damage to
the throttle body.
(5) Emission-related component.
(7) Perform at storage period
or after 100 hours of use
whichever comes first.
_____________________
103