Operating instructions

79
Inspect mufflers, battery and reservoir
fastening devices. Check electrical con-
nections for corrosion and tightness.
Inspect hull and jet pump water intake
grate for damage. Replace or have dam-
aged parts repaired.
Cleaning
Twice a year, the bilge should be cleaned
with hot water and detergent or bilge
cleaner to remove any possible fuel/
oil/electrolyte deposits and mildew.
Occasionally, wash the body with hot
water and soap (only use mild deter-
gent). Remove any marine organisms
from engine and/or hull. Apply non-
abrasive wax.
CAUTION: Never clean fiberglass and
plastic parts with strong detergent,
degreasing agent, paint thinner, ace-
tone, etc.
Wash windscreen with Bombardier
cleaner (P/N 293 110 001) and water.
For fine scratches and scuff marks re-
moval, use a windshield polisher for
acrylic, lucite, polycarbonate and simi-
lar materials.
Stains may be removed from seats
and fiberglass with Knight’s Spray-
Nine
†
or the equivalent.
Respect the environment by ensuring
fuel, oil or cleaning solutions do not
drain into the waterways.
† Knight’s Spray Nine is a registered trademark
of Knight Oil Corporation.
lmo2004-004b.fm Page 79 Wednesday, August 6, 2003 11:19 AM