Manualshelf

Installation & Assembly

ManualsBrandsSeachrome ManualsBathroom Remodel & Bathroom FixturesWhite Folding with Swing Down Legs ADA Compliant Shower Chair
123
Page 2 of 3
INSTALLATION INSTRUCTIONS
SLR2 SEATS
FRAME
2. Mounting the seat top to the frame.
Mount the seat top to the frame in the desired
configuration.
Using four (4) ¼”-20 x 2” Phillips Flat Head
machine screws and (4) ¼”-20 Nylon Lock Nuts
(supplied by manufacturer), secure the seat top
to the frame. Torque screws to 20 ft-lbs.
3. Determine seat height from the floor and location relative to the inside back wall.
ADA regulations specify a finished seat height 17” to 19” above the finished floor and
1-1/2” clearance between the seat edge and the inside back wall.
Place the seat in an upright position with the
mounting flanges placed firmly against the
shower wall.