Installation Guide

INSTALLATION INSTRUCTIONS
Silhouette SlimLine
Tub/Shower Seat
LIFESTYLE & WELLNESS ®
LIFESTYLE & WELLNESS®
Patent Pending
Page 2
of 5
2. Locating the SlimLine Tub/Shower Seat in the desired position for Walk-in Showers and Tub Enclosures.
Diagram 1
Walk-in Shower
Diagram 2
Tub Enclosure
Remove and open the paper template from
the shipping carton.
Locate the area with 2” solid wood in-wall
backing. Determine desired seat height
(ADA requirements stipulate a seat height of
17” – 19” from the floor). Using the
template (supplied by manufacturer), align
hole centerlines with the in-wall backing.
Using a level (not provided) ensure the “Top
of Seat Mounting Bracket” line is level.
(See Diagram 4)
Tape the template into position on the
mounting surface.
When installing the seat in a tub enclosure,
place the tub/shower seat in the open
position (as shown in Diagrams 1 & 2)
against the template, prior to installation, to
ensure the bottom of the seat will clear the
tub dam. (See Diagram 2)
Using a pencil or suitable marker, it is
extremely important you mark the center of
each of the six (6) mounting holes precisely
on the mounting surface. (See Diagram 4)