Installation Guide

June 2022
INSTALLATION INSTRUCTIONS
Silhouette Comfort
Tub/Shower Seat
LIFESTYLE & WELLNESS ®
LIFESTYLE & WELLNESS®
Patent Pending
Page 2
of 5
2. Locating the Silhouette Comfort Seat in the desired position for Walk-in Showers and Tub Enclosures.
Diagram 1
Walk-in Shower
Diagram 2
Tub Enclosure
Remove and open the paper mounting template
from the shipping carton.
Locate the area with 2” solid wood in-wall
backing. Determine desired seat height (ADA
requirements stipulate a seat height of 17” – 19”
from the floor). Using the mounting template
(supplied by manufacturer), align hole
centerlines with the in-wall backing. Using a
level (not provided) ensure the “Top of Seat
Frame Mounting Bracket” line is level. (See
Diagram 3)
Tape the mounting template into position on the
mounting surface.
When installing the seat in a tub enclosure, place
the shower seat in the open position (as shown
in Diagrams 1 & 2) against the mounting
template, prior to installation, to ensure the
bottom of the seat will clear the tub dam. (See
Diagram 2)
Using a pencil or suitable marker, it is extremely
important you mark the center of each of the
four (4) mounting holes precisely on the
mounting surface. (See Diagram 3)