Installation Guide

INSTALLATION INSTRUCTIONS
Silhouette
Shower Seat
LIFESTYLE & WELLNESS ®
LIFESTYLE & WELLNESS®
U.S. Patent No. D784,034 S
Page 2
of 4
2. Locating the Shower Seat in the desired position for Walk-in Showers and Tub Enclosures.
Walk-in Shower
Tub Enclosure
Remove and open the paper template from the
shipping carton.
Locate the area with 2” solid wood in-wall
backing. Determine desired seat height (ADA
requirements stipulate a seat height of 17” – 19”
from the floor). Using the template (supplied by
manufacturer), align hole centerlines with the in-
wall backing. Using a level (not provided) ensure
the “Top of Seat Frame Mounting Bracket” line is
level.
Tape the template into position on the mounting
surface.
When installing the seat in a tub enclosure, place
the shower seat (in the open position) against
the template, prior to installation, to ensure the
bottom of the seat will clear the tub dam.
Using a pencil or suitable marker, it is extremely
important you mark the center of each of the six
(6) mounting holes precisely on the mounting
surface. (See Diagram A)