Operating instructions

Page 10 of 20
3. Repeat for left side. Adjust the cabinet until
the distance on each side is the same.
4. Use a 3/16” drill bit to drill 3 starter holes ½”
deep through the 3 holes in the cabinet and
into the window sill.
5. Attach cabinet to windowsill with 3 - #10 x ½”
pan-head Phillips screws.
6. Check that the air conditioner cabinet is tilted
½ bubble on carpenters level to the outside
so that water will run to the outside.
_______________________________________
Attach Side Curtains to Window Frame
1. Pull left-hand curtain out until it fits into
window channel. Use a 3/32” drill bit to drill a
starter hole through the hole in the curtain
housing and into the lower window sash.
Front View
Top View
2. Insert one of the #10 x ¾” round-head
screws through hole and into lower window
sash. Insert one of the #10 x ¾” round-head
screws through threaded hole in top of
curtain and one in bottom of curtain.
3. Repeat for right-hand curtain.