Specifications

Spin Pole Track Lines Not Applicable
13. Outfit
13.1. Owners Manuals
Builder shall supply two complete sets of Owner’s manuals, including maintenance and
repair instructions, as supplied with mechanical and electrical equipment. Additionally,
the Builder shall supply two sets of diagrams and instructions for electrical, piping and
similar systems, in “as-built” form.
13.2. Tender (Owner Supplied)
One Zodiac YL 275R tender with Yamaha 15hp to stow transversally, inflated, on the
wet deck under the aft cockpit sole. To be securely chocked when stowed, optional
storage is to be provided on the wet deck for when the motor is not mounted on the
dinghy transom. Builder to finalize working drawings of tender and actuation system to
ensure proper operation and fit. Transom door/deck to be remotely operated from
cockpit.
13.3. Chain and Anchor Rodes
One 100 meter length of 11.1mm Grade 500 galvanized chain with suitable shackles,
thimble, splice, etc. Dead-end to be securely fastened to hull structure in the chain
locker with short length of 22mm nylon braid. Storage in chain locker below foredeck
anchor locker.
One 100 meter length of 22mm braided nylon, fitted with 10 meters of 11.1mm Grade
500 galvanized steel chain with suitable shackles, thimble, splice, etc. Storage in
lazarette.
One 10 meter x 19mm nylon braid w/ heavy-duty stainless hook to act as anchor chain
snubber.
13.4. Anchors
Main anchor - One 75lb CQR to be stowed on bow roller. Kedge
anchor – One Fortress FX85 (47 lbs) stowed in lazarette.
13.5. Dock Lines
Four 20 meter lengths of 19mm nylon braid. Four
12 meter lengths of 19mm nylon braid line Storage
to be provided in forepeak and lazarette.
13.6. Fenders
Two white pneumatic fenders, 300 x 910, to be provided. Six
white pneumatic fenders, 200 x 785, to be provided.
53