Specifications

Drawer Hardware
Drawers latches/handles to be Sugatsune type PLK push latch or equal. Drawers to be
mounted on self closing Mepla or Sugatsune runners.
Handrails
Handrails to be provided to allow safe movement about the cabins at all times. To be
built as understood between Architect and Builder.
Refrigerator Hardware
Refrigerator and freezer door hardware to be stainless steel, heavy-duty hinges and
latches with over center catch. Refrigerator and freezer doors to have hold-open and
stop mechanisms.
Stove Safety Bar
A stainless steel crash bar is to be installed across the front of the stove just below
counter height.
Miscellaneous
Kick plates on steps, stainless steel chafing pieces on companionway and other sills,
and similar fittings as required, shall be provided.
Har
dware Required for Interior (Prelim Estimate)
Function
Mortise
Locksets
Handles
(Sets)
Escutcheon
Plates &
Roses
Anti
-
Knock
Door holders
Locker &
Drawer
Catches
Make & Model
Crew Cabin
3
Crew Heads
1 1 2 1 3
Owners Cabin
1 1 2 1 20
Owners Heads
1 1 2 1 7
Saloon
12
Galley
6
Chart Table/Passage
7
Stbd Guest Head
1 1 2 1 4
Stbd Guest Cabin
1 1 2 1 7
Port Guest Head
1 1 2 1 4
Port Guest Cabin
1 1 2 1 7
Totals 7 7 14 7 80 0
5.21. Galley Equipment
Stove
To be Alpes-Inox Mod. C50x50/4GFG four (4) burner with oven, stainless steel finish.
Oven thermostat and thermocouple shut-off to be installed. Stove to be installed on
gimballing mount. Provision to be made to secure the stove from gimballing while in
port. Counter cut out to be properly insulated with stainless steel lining.
21