Specifications

Every effort is to be made to make sole panels as sound tight as practical. Floorboards
to be lifted with suction cup handles (as used in the glass window trade). Attention must
be paid to providing access to all portions of the bilge and all items of equipment.
Specific panels will be designated as under sole storage areas.
5.16. Shower Pans
Shower pans to be fabricated from custom GRP moldings with perimeter drains, not
gratings.
5.17. Mirrors
Best grade 3mm glass mirrors, with frames and sized as per plans or as directed,
located over Owner’s and guest head wash basins. A full-length Plexiglas mirror to be
provided on the back of stateroom hanging locker doors in the sleeping cabins.
5.18. Quantities/Areas Required for Interior Partition Bulkheads and Panels
Materials Required for Interior: (Still to be decided)
___m
2
of __mm __kg/m
3
Nomex Honeycomb Core (For modules & bhds).
___m
2
of __mm Marine Ply (For modules & bhds).
___m2 of __mm Teak Veneer (For modules & bhds).
___m2 of __x__ Teak (For fiddles)
___m2 of __mm Marine Ply (For ceilings).
___m2 of Ultra-Suade (For ceilings).
___m2 of __mm Corian (For head & galley work tops).
5.19. Compartment Description
Chain Locker
Locker to be positioned in the fore peak, as far aft as practical, and shall be sized to fit
100m of 11.1mm chain.
Locker sides to be hull sides, lockers ends to be fabricated and located to suit chain
capacity. Locker/bin sides to be lined with 12mm thick high density closed cell foam
rubber.
Locker to be designed for self-stowage of the chain.
Pad eye to be fitted for chain bitter end.
Floor to be positioned above waterline and angled down aft to facilitate drainage from
two 20mm drain holes located in the bootstripe.
Crew Cabin
Upper and lower bunks on port side with drawers under lower bunk. Hanging locker and
lockers with shelf to starboard.
Crew Heads
Head and is on port side with lockers outboard and basin is on starboard side with
lockers outboard. Shower in space between, shower curtain to be provided for at sides
and forward end. Head and shower stall soles to have integral GRP sump trays with
corner drains provided for.
31-03-09
Design: Botin & Carkeek
18