Instruction manual

Spacer

Deep groove

E-16

External Controls

Power switch

By rotating the knob as shown, you can turn

the power ON/OFF and operate the illumina-

tion switch.

Focus / Zoom dial

When shooting with a focus / zoom gear:

Pull the focus / zoom dial out and rotate it

so that the convex part of the dial is set in

the deep groove on the spacer.

Shallow groove

When shooting without a focus / Zoom gear:

CAUTION

The focus / zoom dial cannot be used if

there is no gear mounted on the lens.

When using a zoom gear, you cannot

shoot with manual focus.

If you will be shooting autofocus shots with the focus gear mounted on the

lens, make sure to use the shallow groove. If you set it to the deep groove,

it could damage the lens.

Pull the focus / zoom dial out and rotate

it so that the convex part of the dial is set

in the shallow groove on the spacer.

E-15

Connecting the Strobe

To use this product in combination with an external strobe, first connect the

optional connector set or MDX-5D Mark III dedicated housing built-in YS

converter and then connect the strobe to the housing via the strobe sync

cord or YS Converter/C.

"Attaching the Optional Accessories" (Page E-18)

See: