Instruction manual

E-10

Opening and Closing the Housing

CAUTION

Closing the locking latches

Align the front case with the rear

case and press them together

First, put the right and left

locking latches on the hooks

(

㻃㻃㻃), and close the locking

latches simultaneously (㻃㻃㻃㻃)

Before aligning the rear case and front case, make sure there are no specks

of dust, scratches, or deformities on the O-ring and the O-ring contact

surfaces.

Check to make sure that the locking latches are securely locked.

E-9

CAUTION

Opening and Closing the Housing

Opening the locking latches

When removing the locking latches,

be sure to use the tips of your fingers,

not your fingernails.

If you lock the locking latch after it is

removed from the hook, it is easier

to remove the rear case.

With the surface of the rear

case facing up, press and hold

the right and left locks (㻃㻃㻃㻃) and

remove the locking latches

from the hooks (㻃㻃㻃㻃)

Opening and closing the housing is done with the locking latches. Here we

will explain how to open and close the locking latches.