Installation Guide

2
1A
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Neatly place the wires into the junction box, mount the fixture base onto the mounting plate, and secure it in place using
the fixture screws.
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
Carefully insert the glass panels into the fixture and secure them in place using the provided clips.
Install the cover to the bottom of the fixture and secure it in place using the cover screws.
For wet locations, caulk around the base of the fixture with waterproof construction sealant.
1
2
3
4
5
Install the Fixture
6
FIXTURE
1
1
2
3
JUNCTION BOX
MOUNTING
PLATE
GLASS PANEL
CLIP
FIXTURE SCREW
7
5
8
6
LAMP
COVER
COVER SCREW
8
7