SDS

Page 7 of 9
Sea Foam Sales Company
510 North Chestnut Street
Chaska, MN, USA 55318
Sea Foam Motor Treatment
SDS Revision Date: 9/5/2019
SAFETY DATA SHEET
SECTION 14. TRANSPORTATION INFORMATION
Regulatory
Information
UN Number
UN proper shipping name
Transport
hazard
class(es)
Packing
Group
Label
TDG
UN1993
FLAMMABLE LIQUID, N.O.S. (Contains Petroleum Distillates;
Isopropanol)
3
II
TDG
Additional
information
ERG #128
The listed transportation information applies only to ground transport and does not address regulatory variations due to changes in
package size, mode of shipment, or other regulatory descriptors.
49CFR/DOT
UN1993
FLAMMABLE LIQUID, N.O.S. (Contains Petroleum Distillates;
Isopropanol)
3
II
49CFR/DOT
Additional
information
ERG #128
The listed transportation information applies only to ground transport and does not address regulatory variations due to changes in
package size, mode of shipment, or other regulatory descriptors. The packaging exceptions contained in 49 C.F.R. § 173.150 apply.
Special precautions for user
: Appropriate advice on safety must accompany the package. Keep away from heat, sparks
and open flame. - No smoking.
Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
: This information is not available.
Synergistic materials
: None known or reported by the manufacturer.
Toxicological data
: The calculated ATE values for this mixture are:
ATE oral = 23,600 mg/kg
ATE dermal = 8,343 mg/kg
ATE inhalation (mists) = 65.7 mg/L/4H
See below for individual ingredient acute toxicity data.
LC
50
(4 hr)
LD50
Chemical name
inh, rat
(Oral, rat)
(Rabbit, dermal)
Hydrocarbon Blend
N/Av
>15000 mg/kg
>5000 mg/kg
Isopropanol
4720 mg/kg
12890 mg/kg
Other important toxicological hazards
: None known or reported by the manufacturer.
SECTION 12. ECOLOGICAL INFORMATION
Ecotoxicity
: No data is available on the product itself
Persistence and degradability
: The product itself has not been tested. Contains: Isopropanol. Isopropanol is considered to
be readily biodegradable.
Bioaccumulation potential
: The product itself has not been tested.
Mobility in soil
: The product itself has not been tested.
Other adverse environmental effects
: None known.
SECTION 13. DISPOSAL CONSIDERATIONS
Handling for disposal
: Handle in accordance with good industrial hygiene and safety practice. Refer to protective
measures listed in sections 7 and 8. Empty containers retain residue (liquid and/or vapor) and
can be dangerous. Do not cut, weld, drill or grind on or near this container.
Methods of disposal
: Dispose of in accordance with federal, provincial and local hazardous waste laws. Contact
your local, state or federal environmental agency for specific rules. For assistance with your
waste management needs, contact EMCO’s Waste Services Division at [phone].
RCRA
: If this product, as supplied, becomes a waste in the United States, it may meet the criteria of
a hazardous waste as defined under RCRA, Title 40 CFR 261. It is the responsibility of the
waste generator to determine the proper waste identification and disposal method. For
disposal of unused or waste material, check with local, state and federal environmental
agencies.
17000 ppm