Installation Guide

HOW TO ADD SEA FOAM
MOTOR TREATMENT TO
CRANKCASE OIL
BENEFITS
FOR MORE HELPFUL RESOURCES VISIT: SeaFoamWorks.com
INSTRUCTIONS
Safely liquefy petroleum residues that restrict flow and
lubrication.
Clean oil control rings, vvt solenoids and actuators.
Dissolve and clean deposits throughout the crankcase
including diesel soot residues.
Clean and quiet noisy lifters and timing chain
tensioners and reduce diesel injector stiction.






When added to gasoline and diesel crankcase oil, Sea
Foam Motor Treatment works to help:
First determine the engine’s crankcase oil capacity. Most autos and light trucks have 5 or 6 quart
systems. Check in your vehicle’s owner’s manual for the size of your crankcase. One 16 ounce can
of Sea Foam Motor Treatment treats up to 16 quarts of oil.
Add one ounce of Sea Foam Motor Treatment for every quart of oil in the crankcase. When ready,
remove oil filler cap and pour the recommended amount of Sea Foam directly into the engine
crankcase. Do not exceed one treatment per oil change interval.
NOTE:
Though Sea Foam can be added at any time between oil change intervals, we recommend adding
Sea Foam to an oil crankcase 100 to 300 drive miles before changing oil and filter.
CONCLUSION
Sea Foam Motor Treatment can be used in every type of gasoline or diesel engine. When added to an
engine’s oil crankcase, Sea Foam Motor Treatment works to clean and liquefy heavier oil deposits, so
the residues will drain away when the oil is changed. Sea Foam cleans internal engine parts, prevents
sludge and other harmful oil formations.