SDS

US. NIOSH: Pocket Guide to Chemical Hazards
Form
ValueComponents Type
TWA 9000 mg/m3
5000 ppm
Ceiling 1800 mg/m3Hydrocarbon blend
STEL 10 mg/m3 Mist.
STEL 1225 mg/m3Isopropanol (CAS 67-63-0)
500 ppm
TWA 980 mg/m3
400 ppm
Biological limit values
ACGIH Biological Exposure Indices
ValueComponents Determinant Specimen Sampling Time
40 mg/l Acetone Urine
*
Isopropanol (CAS 67-63-0)
* - For sampling details, please see the source document.
Good general ventilation should be used. Ventilation rates should be matched to conditions. If
applicable, use process enclosures, local exhaust ventilation, or other engineering controls to
maintain airborne levels below recommended exposure limits. If exposure limits have not been
established, maintain airborne levels to an acceptable level. Provide eyewash station and safety
shower.
Appropriate engineering
controls
Individual protection measures, such as personal protective equipment
Wear safety glasses with side shields (or goggles). Face shield is recommended.
Eye/face protection
Skin protection
Wear appropriate chemical resistant gloves. Suitable gloves can be recommended by the glove
supplier.
Hand protection
Skin protection
Wear appropriate chemical resistant clothing.
Other
When workers are facing concentrations above the exposure limit they must use appropriate
certified respirators. Wear NIOSH approved respirator appropriate for airborne exposure at the
point of use. Appropriate respirator selection should be made by a qualified professional.
Respiratory protection
Wear appropriate thermal protective clothing, when necessary.
Thermal hazards
When using do not smoke. Always observe good personal hygiene measures, such as washing
after handling the material and before eating, drinking, and/or smoking. Routinely wash work
clothing and protective equipment to remove contaminants.
General hygiene
considerations
9. Physical and chemical properties
Appearance
Liquid.
Physical state
Aerosol spray can - Pressurized Liquid.
Form
Colorless.
Color
Petroleum hydrocarbon.
Odor
Odor threshold
Not available.
pH
Not available.
Melting point/freezing point
Not available.
Initial boiling point and boiling
range
180 °F (82.2 °C)
Flash point
55.0 °F (12.8 °C) Tag Closed Cup
Evaporation rate
< 1
Not applicable.
Flammability (solid, gas)
Upper/lower flammability or explosive limits
Flammability limit - lower
(%)
Not available.
Sea Foam Spray SDS US
946023 Version #: 01 Revision date: - Issue date: 09-November-2018
4 / 9