SDS

SAFETY DATA SHEET Sea Foam Concentrated Fuel injector Cleaner
Revised: 4/18/2019 Page 2
Hazardous Ingredients:
Component
CAS No.
Conc (wt%)
Petroleum distillates, hydrotreated heavy paraffinic
64742-54-7
60 - 70
Solvent naphtha (petroleum), light aromatic
64742-95-6
10 - 20
Polyolefin alkyl phenol alkyl amine
Proprietary
5 – 10
Benzene, 1,2,4-trimethyl-
95-63-6
5 – 10
Benzene, 1,3,5-trimethyl-
108-67-8
< 5
N-propylbenzene
103-65-1
< 3
Xylene
1330-20-7
< 3
2-ethylhexanol
104-76-7
< 3
Cumene
98-82-8
< 3
Benzene, 1,2,3-trimethyl
526-73-8
< 3
Alkyl benzene
Proprietary
< 3
4. First Aid Measures
Eyes Flush eyes with running water for at least 15 minutes. Get
medical attention if irritation persists
Skin Flush exposed area with running water for at least 15
minutes. Remove contaminated clothing and launder before
reuse. Get medical attention if irritation persists or if signs of
an allergic reaction appear.
Inhalation Move to fresh air. If nausea or other symptoms persist, get
medical attention. If not breathing, give artificial respiration.
If breathing is difficult, give oxygen and get medical attention
immediately.
Ingestion DO NOT INDUCE VOMITING. If vomiting occurs
spontaneously, lower head below hips to reduce risk of
aspiration.
Additional Info Note to physician: Treat symptomatically.
5. Fire Fighting Measures
Flash Point > 93°C / 199°F (based on flammability of components)
Extinguishing Media Use water spray, fog, foam, dry chemical or CO
2
Unsuitable Media Water jet may cause fire to spread
Firefighting Procedures: Fire-fighters should wear positive pressure self-contained
breathing apparatus (SCBA) and full turnout gear