SDS

IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing
IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do – continue
rinsing
If skin irritation occurs: Get medical advice/attention
If eye irritation persists: Get medical advice/attention
Store locked up
Store in a well ventilated place. Keep container tightly closed
Store in a well ventilated place. Keep cool
Dispose of contents/container to comply with all local, state, and federal regulations
3. COMPOSITION/INFORMATION ON INGREDIENTS
Chemical Name CAS No. Percent
Blend <95%Hydrocarbon blend*
67-63-0 <35%
Isopropanol Alcohol
* Note: The exact composition withheld as a trade secret
4. FIRST AID MEASURES
INHALATION: Remove to fresh air. Administer oxygen if needed. Apply artificial respiration if breating has stopped .
Get medical attention.
EYE CONTACT: Wash immediately with large volumes of fresh water for at least 15 minutes . Get medical attention.
SKIN CONTACT: Wipe off with a towel. Wash with soap and water. Get medical attention if irritation persists.
INGESTION: If swallowed, do not induce vomiting. Get immediate medical attention.
Most important symptoms/effects, acute and delayed: Repeated exposure may cause skin dryness or cracking.
Indication of immediate medical attention and special treatment needed: None known.
5. FIRE FIGHTING MEASURES
Suitable and unsuitable extinguising media: Foam, Alcohol foam, CO2, Dry chemical, Water fog. Water spray may be
ineffective.
Specific hazards arising from the chemical: Closed containers may explode from internal pressure build-up when
exposed to extreme heat and discharge contents. Liquid content of container will support combustion. Overexposure to
decomposition products may cause a health hazard. Symptoms may not be readily apparent. Obtain medical attention.
Hazardous decomposition products include carbon dioxide, carbon monoxide, and other toxic fumes.
Special equipment and precautions for fire-fighters: Water may be used to cool containers to prevent pressure build-
up and explosion when exposed to extreme heat. Wear goggles and use self-contained breathing apparatus . If water is
used, fog nozzles are preferred.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment, and emergency procedures: Avoid breathing vapors. Ventilate area.
Remove all sources of ignition.
Methods and materials for containment and cleaning up: Clean up with absorbent material and place in closed
containers for disposal.
SDS for: HM16
Page 2 of 4
Printed: 12/4/2018