User`s manual

Section 3: Configure Inputs, Part I - Instrument Configuration (.con file)
17
Viewing, Modifying, or Creating .con File
1. To create a new .con file: Click Configure Inputs. In the Configure
Inputs dialog box, click the Instrument Configuration tab. Click Create. In
the Select an Instrument dialog box, select the desired instrument and
click OK. Go to Step 3.
2. To select and view or modify an existing .con file: Click Configure
Inputs. In the Configure Inputs dialog box, click the Instrument
Configuration tab. Click Open. In the Select Instrument Configuration
File dialog box, browse to the desired file and click Open. The
configuration information appears on the Instrument Configuration tab.
An example is shown for the SBE 9plus.
Click Modify to bring up a dialog box to change the configuration and/or
view calibration coefficients.
3. The Configuration dialog box appears. Selections at the top are different
for each instrument. An example is shown for the SBE 9plus.
This screen
provides an
easy way to
view
configuration,
but selections
cannot be
modified here;
click Modify to
change
configuration
and/or to view
calibration
coefficients.