Specifications

1
APPLICATION NOTE NO. 69 July 2002
Conversion of Pressure to Depth
Sea-Birds SEASOFT software can calculate and output depth, if the instrument data includes
pressure. Additionally, some Sea-Bird instruments (such as the SBE 37-SI or SBE 50) can be set up
by the user to internally calculate depth, and to output depth along with the measured parameters.
Sea-Bird uses the following algorithms for calculating depth:
Fresh Water Applications
Because most fresh water applications are shallow, and high precision in depth not too critical,
Sea-Bird software uses a very simple approximation to calculate depth:
depth (meters) = pressure (decibars) * 1.019716
Seawater Applications
Sea-Bird uses the formula in UNESCO Technical Papers in Marine Science No. 44. This is an
empirical formula that takes compressibility (that is, density) into account. An ocean water column
at 0 °C (t = 0) and 35 PSU (s = 35) is assumed.
The gravity variation with latitude and pressure is computed as:
g (m/sec
2
) = 9.780318 * [ 1.0 + ( 5.2788x10
-3
+ 2.36x10
-5
* x) * x ] + 1.092x10
-6
* p
where
x = [sin (latitude / 57.29578) ]
2
p = pressure (decibars)
Then, depth is calculated from pressure:
depth (meters) = [(((-1.82x10
-15
* p + 2.279x10
-10
) * p - 2.2512x10
-5
) * p + 9.72659) * p] / g
where
p = pressure (decibars)
g = gravity (m/sec
2
)
Sea-Bird Electronics, Inc.
1808 136th Place NE
Bellevue, WA 98005
US
A
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
Web: www.seabird.com
