User`s manual

Manual revision 016 Index SBE 49
73
Continued from previous page
012
08/08
• Manufacturing change: note in electronics disassembly/reassembly that for plastic housing, 2
phillips-head screws at connector end cap end & 3 at sensor end cap end replaced with hex
screws. 9/64” allen wrench shipped with 49.
• Change pressure stability specifications to per year instead of per month.
• Update connector maintenance to be consistent with application note 57.
• Add information that POffset is in decibars.
•
Update system schematics with 55, 32, 36 to show 19plus V2 CTD.
013
02/10
• Update anti-foul label in Appendix with new Container Handling requirement and new address.
• Add information required for CE certification.
• Add CE mark.
• Update for Seasave/SBE Data Processing 7.19, configuration file now allows selection of NMEA
connected directly to the computer.
• Update software name.
• Add statement about compatibility with Vista.
• Seasave and SBE Data Processing 7.20a: Add information about .xmlcon file.
• Update SBE address.
014
01/13
• Add Declaration of Conformity.
• Update diagrams showing use with SBE 33 or 36 Deck Units, to include SBE 25plus in list of CTDs
and to show Surface PAR channel as standard in these deck units.
• Add note in dimensions section that exhaust barb is not flush to the housing.
• Add more troubleshooting information.
• Add photo showing removal of protective plugs before deployment.
• Update software compatibility information.
• Remove references to Druck pressure sensors (can be supplied by other manufacturers).
• Add information about cell thermal mass corrections in freshwater deployments.
• Add cable and internal wiring diagrams.
• Update description of PN 50312.
• Add PN 60052 spare parts kit.
• Update Triton company name and link.
015
09/13
• Change specification for plastic housing to 350 m from 250 m.
• Clarify that accuracy specifications are ±.
• Add information on editing raw .hex files.
• Update Declaration of Conformity.
• Add section on O-ring maintenance.
• Remove reference to old version of Seasave (Seasave-Win32).
• Correct part numbers in Replacement Parts for T-C duct, anti-foulant holder, and plumbing.
016
03/14
• Remove information that Seasave does not allow Surface PAR acquisition with SBE 49; update
Seasave configuration dialog box for software update to accommodate Surface PAR (Seasave
7.23.2).
• Add caution on using spray can lubricants on MCBH connectors.
• Remove standard and optional language.