User`s manual

Manual revision 016 Appendix VI: Replacement Parts SBE 49
69
Appendix VI: Replacement Parts
Part
Number
Part Application Description
Quantity
in FastCAT
801385
4-pin RMG-4FS to 9-pin
DB-9S I/O cable with
power leads, 2.4 m (8 ft)
From FastCAT to computer/
controller and power supply
1
17046.1
4-pin RMG-4FS dummy
plug with locking sleeve
For storage when I/O cable
not used
1
17043
Locking sleeve for RMG
connector
Locks I/O cable or dummy plug
in place
1
801206
4-pin MCIL-4FS (wet-
pluggable connector) to
9-pin DB-9S I/O cable
with power leads,
2.4 m (8 ft)
From FastCAT to computer/
controller and power supply
1
171398.1
4-pin MCIL-4FS
(wet-
pluggable connector)
dummy plug with
locking sleeve
For storage when I/O cable not
connected
1
171192
Locking sleeve
(wet-pluggable connector)
Locks I/O cable or dummy plug
in place
1
30411 Triton X-100
Octyl Phenol Ethoxylate – Reagent
grade non-ionic cleaning solution
for conductivity cell (supplied in
100% strength; dilute as directed)
1
801542
AF24173
Anti-Foulant Device
bis(tributyltin) oxide device inserted
into anti-foulant device cup
1 (set of 2)
233564
Anti-foulant device cup
on pump exhaust
plumbing, black
Holds optional
AF24173 Anti-Foulant Device
1
231565
Anti-foulant device cap
on pump exhaust
plumbing, black
Secures optional AF24173
Anti-Foulant Device in cup
1
233493 T-C Duct top, black
T-C Duct, also secures optional
AF24173 Anti-Foulant Device
in base
1
233515 T-C Duct base, black
T-C Duct, holds optional AF24173
Anti-Foulant Device
1
232395 Straight pump exhaust
Straight exhaust fitting, mounts to
sensor guard
1
231408 Tee pump exhaust
Tee exhaust fitting for slow
profiling applications, mounts to
sensor guard
30132
Screw, 4-40 x
3
/4 flat
Phillips-head, stainless
Secures pump exhaust fitting to
sensor guard
1
30239
Washer, #4 nylon
WN-4
For 30132 screw, placed between
tee and sensor guard
2
31629
Tygon tubing,
3/8” ID x 5/8” OD, black
Exhaust plumbing
Continued on next page