User`s manual

Manual revision 016 Appendix III: Command Summary SBE 49
61
CATEGORY COMMAND DESCRIPTION
Coefficients
(F=floating
point number;
S=string with
no spaces)
Dates shown
are when
calibrations
were
performed.
Calibration
coefficients
are initially
factory-
set and
should agree
with
Calibration
Certificates
shipped with
FastCAT.
DCal
Display calibration coefficients; all coefficients and dates listed
below are included in display. Use individual commands below
to modify a particular coefficient or date.
TCalDate=S
S=Temperature calibration date.
TAO=F
F=Temperature A0.
TA1=F
F=Temperature A1.
TA2=F
F=Temperature A2.
TA3=F
F=Temperature A3.
TOffset=F
F=Temperature offset correction.
CCalDate=S
S=Conductivity calibration date.
CG=F
F=Conductivity G.
CH=F
F=Conductivity H.
CI=F
F=Conductivity I.
CJ=F
F=Conductivity J.
CPCOR=F
F=Conductivity pcor.
CTCOR=F
F=Conductivity tcor.
CSlope=F
F=Conductivity slope correction.
PCalDate=S
S=Pressure calibration date.
PRange=F
F=Pressure sensor full scale range (psia).
POffset=F
F=Pressure offset correction (decibars).
PA0=F
F=Pressure A0.
PA1=F
F=Pressure A1.
PA2=F
F=Pressure A2.
PTempA0=F
F=Pressure temperature A0.
PTempA1=F
F=Pressure temperature A1.
PTempA2=F
F=Pressure temperature A2.
PTCA0=F
F=Pressure temperature compensation ptca0.
PTCA1=F
F=Pressure temperature compensation ptca1.
PTCA2=F
F=Pressure temperature compensation ptca2.
PTCB0=F
F=Pressure temperature compensation ptcb0.
PTCB1=F
F=Pressure temperature compensation ptcb1.
PTCB2=F
F=Pressure temperature compensation ptcb2.