User`s manual

Manual revision 016 Section 2: Description of FastCAT SBE 49
12
Dimensions and End Cap Connector
Align with
raised bump on
connector
1
2
3
4
XSG-4-BCL-HP-SS
Pin Description
1 Ground
2 RS-232C Receive from computer
3 RS-232C Transmit to computer
4 Power (9-24 VDC)
1
4
3
2
MCBH Connector
MCBH-4MP (WB), TI
(3/8” length base, ½-20 thread)
FastCAT with tee exhaust for
slow profiling applications
(tee is in spare parts kit
shipped with FastCAT, and is
easily substituted in the field)
FastCAT with straight exhaust
(as shipped by Sea-Bird)
See Optimizing
Data Quality in
Section 4:
Deploying and
Operating FastCAT
for guidelines on
use of straight vs.
tee exhaust.
Note that
exhaust barb
and screw
holding exhaust
barb to sensor
end cap are
not flush to
housing – this is
normal.
An O-ring inside
seals fitting into
end cap.