User`s manual

Appendix I: Command Line Operation
76
To run SEASAVE with a Command Line Parameter:
1. In the Windows Start menu, select Run. The Run dialog box appears.
Enter the command line parameter(s) as shown below:
Path\seasave.exe parameter1 parameter2 . . .
where Path is the location of seasave.exe on your computer, and one or
more command line parameters are listed.
2. SEASAVE opens. Set up the system and displays as desired. The
functions specified by the command line parameters are enabled.
Examples
•
“C:\Program Files\Sea-Bird\seasave.exe” -pc -diffd2 -ws180 (enables 3 parameters shown)
•
“C:\Program Files\Sea-Bird\seasave.exe” –pc (enables 1 parameter shown)
•
“C:\Program Files\Sea-Bird\seasave.exe” –autostart=“C:\Test Directory\testdata.hex”
(automatically starts SEASAVE and data acquisition, saving data to C:\Test Directory\testdata.hex)
Notes:
• If the path includes any
spaces, enclose the path in
quotes (“path“). See the
examples.
• An alternative method of
running SEASAVE with a
Command Line Parameter
is from a command prompt.