User`s manual

Section 7: Real-Time Data Acquisition
66
• COMM Port Configuration: Click to configure the transfer of data.
The COMM Port Configuration dialog box varies, depending on your
system setup.
! SBE 911, 911e, or 911plus, with or without water sampler, the
dialog box looks like this:
! SBE 19, 19plus, or 25, with SBE 32 Carousel water sampler,
the dialog box looks like this:
! SBE 16, 16plus, 19, 19plus, 21, 25, 45, or 49 without SBE 32
Carousel water sampler, the dialog box looks like this:
Baud rate between
deck unit and
computer; must agree
with deck unit setting.
Computer port connected to deck
unit SBE 11 Interface connector;
sends commands to and receives
replies from CTD
Computer port connected to deck
unit Modem Channel connector;
sends commands to and receives
replies from the water sampler
(through the CTD); selection does
not affect operation if not using
water sampler.
Must agree with
SBE 33 dip switch
setting (9600 or 4800)
Computer port connected to SBE 33
Serial Data connector; sends
commands to and receives replies
from the CTD (through Carousel)
Must agree with CTD setup and
SBE 33 dip switch setting (600,
1200, 2400, or 4800)
Computer port
connected to SBE 33
Carousel Data
connector; sends
commands to and
receives replies from
SBE 32 Carousel
•
CTD with PDIM and SBE 36 deck
unit: Baud rate between SBE 36
and computer; must agree with
SBE 36 dip switch setting (9600
or 19200)
• SBE 21 with Interface Box: baud
rate between Interface Box and
computer; must agree with baud
programmed by user into SBE 21
(600, 1200, 2400, 4800, 9600,
19200, or 38400)
• SBE 45 with optional 90402
Interface Box: Box: baud rate
between Box and computer; must
agree with baud programmed by
user into Box (4800, 9600, or
19200)
• Instrument connected directly to
computer: Baud rate between
instrument and computer; must
agree with instrument setup
• CTD with PDIM and SBE 36 deck
unit: Computer port connected to
SBE 36 Serial Data connector;
sends commands to and receives
replies from CTD (through PDIM)
• SBE 21 with Interface Box:
Computer port connected to
Interface Box RS-232C connector;
sends commands to and receives
replies from SBE 21 (through Box)
• SBE 45 with optional 90402
Interface Box: Computer port
connected to Interface Box PC
connector; sends commands to and
receives replies from SBE 45
(through Box)
• Instrument connected directly to
computer: Computer port connected
to instrument; sends commands to
and receives replies from instrument
not applicable
(selection does not
affect operation)