User`s manual

Section 6: ScreenDisplay Menu - Setting Up SEASAVE Displays
63
Overlay Plot Display
The Display Setup dialog box looks like this:
The dialog box selections and buttons include:
• Plot Label: Label placed at top, center of plot.
• Show Fire Sequence, Show Bottle Lines, and Bottle Line
Configuration: For a system integrated with a water sampler.
If Show Fire Sequence selected, SEASAVE lists the bottle closure order
to the right of the plot.
If Show Bottle Lines selected, SEASAVE places a horizontal line in the
plot to indicate the data associated with a bottle closure. Bottle Line
Configuration defines the line - line color and style, and line label.
• Auto Paging of the Display: If selected, the display pages down if the
y-axis data exceeds the selected y-axis maximum for the plot. For
example, if you set up the y-axis for 0 to 1000 dbars, and the actual cast
exceeds 1000 dbars, the y-axis minimum/maximum will adjust to 1000 to
2000 dbars so that it can continue to display data.
• Display Downcast Only: If selected, SEASAVE only plots data with
pressure greater than the previous maximum pressure. It cannot
differentiate between temporary upward movement due to ship movement
and when the upcast actually begins, so data points where the CTD is
moving upward due to ship heave will not display.
• Show Mark Lines: If selected, SEASAVE places a horizontal line in
the plot to indicate the data associated with the user marking a scan.
See Mark Scans in Section 7: Real-Time Data Acquisition.